Engis Corporation
CALL NOW: 905-632-3016 or 877-749-9929
Engis Corporation
  • Engis Corporation
  • Home
  • Company
  • Products
  • Applications
  • Newsroom
  • Contact Us
  • Engis
  • Lapping and Polishing
  • Engis Corporation Engis Corporation

    Engis® Micron Diamond and CBN Powders -
    Particle Size Distribution (PSD)

    Contact Engis Engis Corporation Engis Corporation
    Engis employs a variety of measurement techniques and analyzers for the determination of Particle Size Distribution of micron diamond and CBN powders. This guarantees the diamond powder you purchase from Engis is graded to internal specifications which equal or exceed ANSI and FEPA Standards and are controlled under our ISO 9001:2008 Quality System.

    The Particle Size Distribution of a powder is determined by analyzing a large number of the particles and developing a PSD for the sample. The PSD is then used to verify conformance to the required size specification. Four characteristics of the PSD must meet specification for the powder to be accepted; typically those characteristics are 5% (minimum), Mean/Median, 95% (maximum) and 99.9% (largest particle).

    No other company in the industry can match Engis’ ability to control PSD, particularly in the sub-micron range.

    Electrozone sensing technique using the Beckman-Coulter Multisizer III
    Uses the Coulter principle to measure particle volume and diameter

    High resolution with digital pulse processing and 300 channel range
    Disk centrifuge (sedimentation) technique using the CPS DC24000
    Particle size derived from sedimentation time under centrifugal force

    Very high resolution technique that can cleanly separate narrow peaks that differ in size by as little as 2%

    We provide the best Process Development, Sales and Customer Support in the industry.
    Contact your local Engis
    Regional Sales Manager or Customer Service Representative.

    © Engis CorporationEngis CorporationPrivacy Statement    •    Terms of Use    •    Site MapEngis CorporationISO 9001:2008 Registered
    Engis Corporation Engis Corporation
    Home   |   Company   |   Lapping & Polishing   |   Diamond Powder   |   Grinding Products   |   Bore Finishing   |   Mold & Die Products   |   Newsroom   |   Contact Us
         Engis Corporation   •   3465 Mainway, Unit No. 2   •   urlington, Ontario L7M 1A9   •   Call: 905-632-3016   •   Fax: 905-632-4250Engis CorporationEngis CorporationEngis Corporation
    Engis Corporation
    Engis Corporation